ASH SCOOP (Lidded Bucket)

---

Clean your wood burning stove/insert

The Ash Scoop is a lidded bucket that captures the ash from your wood burning stove/insert fireplaces completely DUSTLESS. The Ash Scoop combines the shovel and bucket into a faster safer cleaning process with no mess. This tool does not require filters or electricity and never clogs. Guaranteed!

• Made in the USA for the Highest Quality
• Full welded seams for Durability
• Smooth Bevel fluted fixed handle for comfort and ease
• 10" Wide pivoting handle for carrying comfort
• Stainless Steel 6"h x 8"w x 22" long ash container
• Hinged/removable lid to eliminate airborne ash particles
• Large holding container to transport Ash in one trip
• Beveled opening to capture the maximum amount of Ash

• No tools required for this lidded bucket
• Fixed handle simply screws into bottom of box
• 3 ¾" Fluted Black Fixed Handle
• 3/16" x 10" carrying pivot handle
• Weight 7.78 lbs
• 22 gauge 304 Stainless Steel box and lid
• Full welded seams
• This hot bin pail is Made in the USA
• Holds up to 920 cubic inches of Ash
• 28 ¾" overall assembled length

1. Use the Ash Scoop to scoop ashes from your stove
2. Close the lid prior to pulling the Ash Scoop from the stove. (This prevents any ash going into the air)
3. Transport the Ash Scoop to your disposal area/container and dump.

Always wear proper protective clothing and gloves. When you are ready to clean out the ashes in your stove, fireplaces (recommended waiting time is 10-12 hours after the last load, but while the stove is still warm), create a pile of the ashes in the center of the stove/insert. For those of you that want to continue heating use the EMBER EXTRACTOR to reclaim any hot coals to continue burning without relighting. Grab the pivoting handle with one hand and the fixed handle with the other and lay the bottom edge of the ASH SCOOP on the opening of the stove/insert with the hinged lid on top of the ASH SCOOP and open the lid See (see picture above). Using both handles, push the ASH SCOOP to the back of the stove until, it meets the back wall. Repeat this scooping motion until all the desired ashes are gathered (Hint: After the first scoop, tilt the ASH SCOOP down and lightly shake making sure not to let the opening of the ASH SCOOP leave the stove/insert. This will move the ashes to the bottom of the ASH SCOOP, making it easier to collect the rest of the ashes in the stove). Once you have all the ashes, pull the ASH SCOOP back toward you once again, DO NOT LET THE OPENING OF THE ASH SCOOP LEAVE THE OPENING OF THE STOVE!!! Continue to hold the fixed handle and with the hand that was holding the pivoting handle close the lid. Re-grasp the pivoting handle and pull the ASH SCOOP from the stove. The ASH SCOOP box may get extremely hot during transport. Never touch the container part of the ASH SCOOP while in use. Release the fixed handle and carry (using the pivoting handle) the ASH SCOOP to your disposal area. THE USER OF THE ASH SCOOP IS RESPONSIBLE FOR PROPERLY DISPOSING OF ASHES IN A SAFE AND ENVIRIONMENTALLY FRIENDLY MANNER. Once you are ready to empty the ASH SCOOP, grab the fixed handle and lift the bottom toward you, aiming the opening at your desired disposal area WARNING-SOME HOT ASHES AND COALS MAY STILL EXSIST CAUSING A POTENTIAL FIRE HAZARD. Once emptied, release the fixed handle and the ASH SCOOP will return to the carry position. Lid will automatically open and close during dumping. Box may remain hot for a short period after dumping.